I have a Bigsky in the mail and I am trying to prep before it gets here.
So the pedal has 300 presets. I have all my pedals setup for 1-127 to go up/down on two switches. Is there a way to program the same switches to go up/down PAST 127 seamlessly? I know you have to send a CC 0 with a value of 0-2 for said banks but I cant think of how to program it or if its even possible?
This is what I have so far
I haven’t got a Bigsky but the MIDI spec is clear that the 300 presets are in banks of 100 as you stated. So I would set up a switch with message scroll with 3 loops or scrolls that will allow you to select CC0 0/1/2 and allow you to name the loops. In selecting one that could then evoke another preset ( 1 of 3 presets) that scrolls through the banks of presets, and depending on the preset first sends out the CC 0/1/2 on an “on entering command” There may be other ways?
Judging by the screenshot, your preset won’t work in the first place.
Combining a scroll counter with toggle mode won’t work.
Using ‘double tap’ to switch the pedal on/off will probably cause problems, too, because the counter is set to ‘press’.
Here is an example of a preset that combines a scroll counter with toggles. It is not exactly what you are trying to do but maybe this will help and give you some ideas.
https://forum.morningstar.io/uploads/short-url/xRQ89YWqOypmsxIxowgd1wxvRId.json
Thank you! I’ll give that a go