Setting Toggles when Switching Presets

MIDI Control Chase Bliss
1

Hello,

I am trying to program my Morningstar MC-6 to work with my Chase Bliss Clean and BrothersAM. I have been successful in sending PC and CC messages to the pedals to switch presets and engage/disengage the effect.

My workflow is as follows:

  • Bank 1:

    • Toggle Mode ON

    • Clean Preset A:

      • Toggle Position 1
        • Send PC 0
        • Send CC 102:1
      • Toggle Position 2
        • Send CC 102:0

    • Clean Preset B:

      • Toggle Position 1
        • Send PC 1
        • Send CC 102:1
      • Toggle Position 2
        • Send CC 102:0

Pressing any switch for the first time switches to the correct preset and engages the pedal. If I press the same switch a second time, it disengages the pedal correctly. For example:

  • Press Switch A for Preset A and the pedal engages.
  • Press Switch B for Preset B and the pedal stays engaged and switches to Preset B
  • Press Switch A again for Preset A and the pedal disengages.

The desired effect would be that the pedal switches presets and is engaged.

Do you know how to implement this for the Morningstar MC6?

Cheers and thanks,

2

Replying to my own message with the solution:
Solved: Action: On Disengage, Type: Toggle Preset, Pos2.