I have MC3, 5pin midi in to MC8, 5pin midi out to focusrite, into my ipad. using midi wrench I can see midi signal when each MC is connected individually, but when I connect them as described. only the MC8 will show activity in midi wrench test app.
I have midi thru selected on the MC8. I’ve check via the interface and manually on the MC. Any ideas?
Hi! If you send PC messages from the MC3 into the MC8 on the MC8’s designated channel, can you make it switch banks? That’d be a good indicator if the MC8 is even getting data from the MC3. The other thing is to hook up the MC8 to a computer over USB and use the editor’s MIDI Monitor.
Ok I’ll test that. I can connect to my PC without issue. I have the Mc3 on channel 2 and Mc8 channel 1. I know the mc3 is outputting data, I can test that and its good. So the Mc8 maynot be receiving?
1 Like
Yeah, if you can use the MC3 to send messages to the MC8 and just check that connection, that would be great. Additionally, if you can send MIDI into the MC8 from any other device over DIN, that help diagnose too.