Pedalnetics aux switch with MC6 mk2

Morningstar Gear Aux Switches
1

I’m using pedelnetics 3 button TRS aux switch connected to EXP 1 port on my MC6 mk2.

After changing the controller settings to make “omniport 1” a “TRS aux switch” and assign the thee switches the only thing the pedalnetics switch will do is go BANK UP on all three switches.

I want to have 1)Bank down 2) Bank up and 3)Toggle Page.

Thank you!

2

Make sure you’re using a TRS cable, then set the port up like this and restart your unit:

image
image776×832 12.3 KB

If it doesn’t seem to be working, try another TRS cable.

3

thank you. I swapped a few TRS cables. I can program the “TIP” to do any function and it works.

However “ring” and “sleeve” just do the same as the “TIP” setting no matter what they are set at.

4

Did you get a standard 3 button aux switch or a resistor ladder switch?

5

Looks like it’s resistor ladder!

“MC6 FrontAux 3

  • What wiring method would you like?:

    Resistor Ladder Switch

  • If applicable, would you like us to add an extension jack on your switch for changing to your next Resistor Ladder Switch? (If you’re at the max switches for your device, we’ll still add it incase you/Morningstart decides to upgrade in the future, you just wont be able to use it for anything now):

    Yes, Expansion jack please

  • 1/4" Jack Location:

    Left Side

6

A ha! Follow the calibration process (guide here: Calibrating your Resistor Ladder Aux Switch | Morningstar Engineering ) and hopefully you’ll get it working!

7

Thanks so much I’’ll try this

8

SUCCESS! Thank you so much Jason!:slightly_smiling_face:

1 Like