Hope someone with more experience can help out on this. Just wondering if there is a way to program (create a command) on a MC (3,6,8) to control a stop signal on a boss RC5. that mimics the way a beatbuddy can stop a RC5 while in play mode.
We know The beatbuddy can effectively stop a RC 5 loop playback while acting as a master only with a midi signal . No need to use CC commands on the RC to achieve this .
As the Morningstar can effectively control the beatbuddy, it would seem logical that the MC units could “mimic” ? and issue a similar command” that can directly stop the RC unit while it’s in play mode.
Here is the beatbuddy midi settings pdf references.
Thx for any input
Skip
Thx for the suggestions , unfortunantely it doesnt seem to work… maybe I’m doing something incorrectly. on the MC 3.
Ver 3.12, All midi channels outputs switched on .
Bank 1 A
msg 1 ) start /stop command on a toggle ( 1 & 2) to start/stop an ios drum machine on ch 10.
RC5 is synced via the tap tempo time on Bank 3 A
RC5 rec/play/Dub mode all ok using ext footswitches /or RC 5 pedal itself
2) Msg 2 -Real time midi stop as suggested on both positions ( no effect) does not stop the Boss RC5
RC 5 cc 80-87 function off
RX ch 1 0r 10
Omni : ON /off
Sync clock :auto
There is an assign target called ‘play/stop’. If realtime stop doesn’t work I’d try to trigger that via CC. That’s how I do it on my RC 500.
Thx
ok dug around a little more and found this channel , will experiment , as also linking a ios drum program too
Take care for now
Skip
