MC6 Pro Assigning MIDI Devices to a specific channel

MIDI Control Strymon
1

I have watched several demos on MIDI and how to setup but must have missed how to actually assign a specific channel to a MIDI Device. I have two Strymon MIDI pedals, a Volante and Deco. Using the editor how do I actually know which channel to assign to send only signals to that device? I should note the Volante is DIN5 and Deco will be TRS.

Help!!!

Mike

2

Check the Strymon manuals for details on how to set midi channels on their pedals.

Also worth noting that only Deco v2 has midi. Original deco does not.

3

MIDI channel assignment is not done by MC6 (or any other midi device)…

I would read each pedal manual on how to assign midi channels…

I hope this helps.

4

You have to set up the pedal to receive MIDI FIRST, and then set the MIDI CHANNEL number.
This is done with a power up mode.
RTFM to see how.

*there are two options to set the Midi Channel:

IF the midi channel number you want to use is between 1-4 you can twist the correct knob on the pedal to set it.

If it is greater than four -
THEN you normally hold down the “save” button - until it blinks blue,
This puts the pedal in “”MIDI CHANNEL MODE”

*the next PC message sent out from the MC controller will SET THE midi channel number (1-16 max).
Out of the box I think it set to channel 1.
Hope this helps