MC6 - Polymoon and Enzo - Boss EV-30 expression

[Skinny]

Edit: Figured it out. Dont use the presets, use the expression for each bank. Labeled underneath the presets.

I am having trouble using expression with the 16 presets in the meris pedals. Heres is my chain:

Guitar > pedals > midi i/o > mc6 mkii

The Boss EV-30 is in omniport 2 and that port is set to exp.

I have calibrated the exp. And it shows percentages on the MC6 while in use.

I have checked all global settings for the meris pedals for receiving midi.

One thing I have changed is the midi clock to accept global clock for tap tempo from the mc6 so I can sync the enzo and polymoon tempo. I have yet to troubleshoot this by changing back to preset clock.

Issue:
While in a given preset, there is no transition between toe and heel while using the exp pedal, and the tempo does sound ‘off’ or weird.

Presets:
Toggle on/Blink on

Msg 1
Action: press
Message type: pc change - pc 1 etc.
Position:1

Msg 2
Action: press
Msg type: control change - cc #14 value 0 (bypass)
Position:2

Msg 3
Action: press
Msg type: control change: cc#4 - use expression values
Position: 1

Not sure if I am even setting this up correctly for exp use. If anyone out there can help, thank you!

[GuitarWolf]

@Skinny

Msg 3
Action: press
Msg type: control change: cc#4 - use expression values
Position: 1

Hi,
‘use value from expression’ will send only a fixed CC value corresponding to the current pedal position.
If you want to change a parameter while moving the pedal you’ll have to set up an expression preset.
Bottom right, choose EXP 2 for Omniport 2:

Use ‘select exp message’ to choose which expression message is active for your preset:

[Skinny]

Thank you so much! I must have been figuring it out when you posted this. The screen shots are a plus.