Is there another way to accomplish a “priming” preset/effect?

I’m using an MC8 Pro to control a Darkglass Anagram, and a few weeks ago I set up a “priming” preset/effect to solve a specific workflow issue.

I have two different sounds that I switch between:

  • Wah/Drive — my main “Lightning” sound
  • Wah — wah by itself

I wanted to be able to switch between these two sounds while keeping one expression pedal. I would prime the effect that I want and trigger the preset through the expression pedal switch, connected through omniports.

The solution I came up with was to create a priming preset/effect. The priming action essentially prepares the appropriate effect state before I switch between the Wah/Drive and Wah presets. I’m currently triggering this using the Shift + Hold function on the MC8.

It works, but I’m wondering if there is a better or more flexible way to accomplish the same thing. Has anyone set up something similar, or is there a different MC8 Pro architecture that would accomplish this?

Thanks!

@GuitarWolf any thoughts?

Hi,
I’m sorry. I think I can’t follow your description. What exactly is the issue? I do not understand why there is a need to ‘prime’ the preset in the first place.

@GuitarWolf I don’t think I provided enough context in my original post. I only have one expression pedal (a Boss EV-1WL), which also has its own footswitch. There are times when I want to use Wah + Drive, and other times when I want to use Wah only.

What I’m trying to figure out is whether there is a way to prime/select the mode between Wah and Wah + Drive using the MC8 Pro, and then use the footswitch on the Boss EV-1WL to actually engage/activate the selected mode.

Ideally, I would like to have an MC8 preset that lets me select/prime either Wah or Wah + Drive, without actually engaging the effect. Then, once the desired mode is selected, I would press the footswitch on the EV-1WL to engage or disengage that selected effect.

Like I mentioned, I accomplished this using the Shift Hold function but I’m wondering if there’s another way to do this. Let me know if you need any additional information.

I think it is possible to streamline this.
I assume you do already know that it is possible to emulate an analog expression pedal by sending the correct CC on the MC’s midi channel?

Don’t use toggle mode.
Programm a toggle preset message on release, pos both.
Programm a select expression message on release, pos both, to control the wha wha.
Set up your ev1 footswitch to send an ‘engage preset/long’ press CC message. (Have a look at the MC’s manual to find the correct CC).
Programm a message to load the wha patch on long press, pos1.
Programm a message to load the wha+drive patch on long press, pos2.

Simple toggle and you are good to go.
You can now change the ev1 function on a preset level by changeing the expression message and the long press message.

Thanks! To make sure I understand - I’m toggling between pos 1 and pos 2 for the Wah and Wah+Drive and using the Long Press function to engage the effect? I’ll try it when I get home.

Should be working like that.

@GuitarWolf This worked beautifully! Thanks! Quick question - do you have an idea on how I can change the colors to reflect engaged/disengaged given how the messages are setup?

Also, regarding the exp message, if you meant that using Select Exp Message would allow me to see the percentage on the screen as I move the wah, the answer is no. The wah works still. I remember @james confirming that % are not shown when using an expression midi pedal.

No, but if you use the build in emulation, sending a specific CC can act like a regular expression pedal. That way you can take advantage of the 'select expression message ’ feature.

You can add long press messages in pos1 and pos2 to change the color of the preset temporarily. Look under message type ‘utility’.

@GuitarWolf thanks again! I found the set background color under utility but the color change stays permanently unless I toggle back between Wah or Wah+Drive. Thoughts?

You’d have to programm a color reset.
A message triggered ‘on disengage’ might do the job.

@GuitarWolf Thanks!. I’ll try it later today.

I think I finally understand your comment about the expression message selection. Lets say I want to emulate an expression pedal with a switch even though the physical pedal does not have a swtich. I figured out how to send a cc message at toe down to turn on the wah. Is there a way to send a cc message at toe down again to turn it off? I tried but its not working. I got it working for toe down on and heel down off. Ideally I would be able to to turn it on and off on toe down like a typical wah pedal. Thoughts?

You could set up a preset with a toggle and engage it via toe down.

@GuitarWolf thanks! Could you explain? I don’t see the option to engage preset at Toe Down. I’m see Toe Down Toggle CC but that does not give me an Engage Preset option.

Hi,
I am under the impression that your ev1 has a programmable footswitch that can send a CC when engaged?
Is that correct?
If so just send the correct CC on the MC’s channel to engage the preset.
The CC# can be found in the manual.

I think you might not have understood me correctly regarding the expression messages. Your ev1 is an expression pedal that sends midi. But the MC’s capabilities to handle standard analog expression pedals are quite sophisticated. If you send a specific CC on the MC’s channel it will act as if an analog expression pedal was connected to one of the omniports. This opens up a lot of options to manage the function of your expression pedal.
It would allow you to take advantage of the ‘select expression message’ feature and other stuff. If you set up your footswitch to engage a specific preset it would be possible to manage the function of that footswitch on the MC, giving you more flexibility.

@GuitarWolf thanks! Forget about the EV1. Its set up.

The scenario I was asking about was if you have an expression pedal without a switch, can we emulate a switch by programming on/off messages at Toe Down. There’s no engage preset function at Toe Down currently. If you don’t know, just tell me. Thanks again!

@james is the above possible?

Hi,
sorry for the confusion, you are correct there is no ‘engage preset’ option for toe down. I could swear it has been in the past !?