As you can see on the pic below, I’ve set every default presets into position 1(toggle 1), which has a black background with an color strips that states each preset. For example, I’ve set clean preset to green, chorus to blue, drive to red etc.
But once selected(or engaged), I wanted the preset display to change into another color so it can indicate which preset I’m in. That’s why I’ve set the drive pos 1 with red strip & black background, and shift pos with red strip & orange background.
Well, there’s no problem when I use a single preset with single pc number.
But As you can See in the picture above, I want to toggle 2 pc’s with one preset with indicating which position I’m in.
I’ve spent hours to reach my ideal plan, but I can’t step further from here.
This is my current state:
when I engage the drive preset from another one, the black background turns to orange and goes to the shift position. Once I press it again, the shift pos turns to position 2, which is a different pc to my fractal.
Well It’s not that bad with using like this, but the problem starts now:
when I press at the pos 2, it turns to pos 1 which is a ‘position that states that preset is not engaged’.
My ideal plan is this:
when I press at the pos 2, then It toggles again to Shift pos, and once more to pos 2, once more to shift, … and again and again.
I know that my request is very complicated… but I don’t have an expert of mc6 pro within my region… So I’m looking foward to your reply. Thank you so much!!