GO to next patch on GT 1000 Core via MC8

Hello!

I have the following use case.

I want to be able to use button E on the mc8 to take me to patch 20 on the core.
I want to be able to use button F on the mc8 to take me to patch 40 on the core.
I want to be able to use button G on the mc8 to take me to patch 60 on the core.

This is no problem. I can solve that. But!

I also want to be able to use button A on the MC8 to go to the next Patch on the core, no matter where it is. Just plus one.

When I have tried PC number scroll it just keeps going from zero and up, and if I go to another patch, it goes back to the last number sent by the MC8.

Is there a way to solve this problem?

Best Regards
Mattias

Hi, you could program your jumps with an ‘on first engage’, then program different pc scroll counters for each of your buttons. To scroll through the patches use the same button you used to jump to your starting point. Last thing you need to do is to program a ‘reset counter’ on all buttons for all scroll counters with an ‘on first engage’.