Bank Preset Messages / Tap Tempo not working

Hi everybody,

I have the following Problem: I am using my GT 1000 Core to send midi clock to all other pedals (MC4Pro and Source Audio Collider). I also have a NUX Loop Core Stereo that doesn´t accept midi clock. It accepts Taps via CC# Messages, so that´s fine. I programmed a preset as tap tempo switch, and I can tap the tempo just fine with it. I also programmed engine 1 to do 5 automated taps which I use with the tap tempo preset to do an automated tap in the current midi clock tempo that is being sent from the boss to the mc4 pro. This also works great.

Now to my problem: I wanted to have the Loop Core getting tapped the tempo automatically at entering the bank. And for my life I just can´t get it to work. First I sent an “on enter bank” message with the same automated tap message. This doesn´t seem to work, as the mc4pro upon entering the bank still seems to be in another tempo from the last preset and I can´t put in a delay, because the delay can also only be triggered upon entering the bank which results in the preset not being changed immedietaly when getting the info for changing the bank from the GT 1000 Core. So this would be a request for a feature: Make a delay bank preset message executable AFTER the bank was being entered. This way - in theory - the bank would change, the midi clock could adapt and then the automated tap would work with the now correct bpm.

Since this didn´t work, I then thought I would just add an engage preset message upon entering the bank. In this case I would engage the tap tempo preset with a long press (which is the automated tap tempo engine). The automated tap tempo works fine if I trigger it directly in the tap tempo preset. If I use the bank preset message to engage the preset it just doesn´t work - and I just can´t figure out why.

To clarify the settings, I added pictures of the actual Controller presets.

Really hope that someone is able to help me out with this!

Best regards,

Marcus