Greetings everyone. I’m using a morningstar mc4 pro, and I’m wondering if there’s a way to prevent sending the same message if a preset on a specific pedal is already selected when selecting a different scene. Such as, I’ve got a common compressor pedal preset that I use as my “base compression” for almost all of my scenes as well as my “clean” tone when I want no other effects selected. As it sits now, when I go from one scene with 3 different pedals selected including my foundational compressor base setting, and I hit the “clean” preset with the same compressor preset, there’s a quick volume “pop” that occurs. Is there some setting in the editor I can choose which is basically something like “if preset 1 on pedal a is already selected, don’t send this signal to pedal a”? I tried the “On first engage” action from the drop down, and it doesn’t seem to do the trick.
The best way i have found to implement a solution for this type of scenario is using the Multi Engage/Bypass message type.
This is a powerful and flexible feature - and has many useful features as a pedal board “configurator’
i use ‘on first engage’ to turn on my compressor - then use the “set” mode of the engage/bypass message type to turn on or off the pedals i need for a sound.
you could also use the “shift” preset type. - or ‘on enter bank’ message - it depends on what way you implement your “sounds” and your songs.
I dont know of a way to “mark” if a pedal is already engaged - i tried also setting a counter as a flag - but there is no way to apply logic to that information.
Hope this helps.
I also use a separate AUX Pedal - connected to an MC omniport, and dedicated to control my ‘always on’ pedal. (And another AUX Pedal for my gain)
This disengages the action from the MC altogether, and prevents a false action.
I use the T,U,V presets - which can also be used by the “engage preset” message type. (copied to all banks)
This works well - and two AUX switches transforms the way you can cleanly navigate the MC controller as well.
Bank up / down - toggle page - jump to “home” bank etc
On a solo i can just tap one switch on AUX pedal at any time - and get instant gain.
The EHX AUX PEDAL - 3 switches - works out of the box….